Chrysler  Voyager       2000-03

 

keys Programming

When

  • Keys added or replaced.

 

How

NOTE: two programmed key transmitters must be available for the following procedure to operate.

·         Obtain all keys

·         Using first programmed key, proceed as follows:

o   Turn ignition switch ON and wait 3 seconds, return to OFF position and remove key.

 

NOTE: first and second programmed key operations MUST be performed within 15 seconds.

  • Insert second programmed key and switch ignition ON
  • Wait approximately 10 seconds.
  • Ensure immobilizer warning lamp begins to flash and an acoustic signal is emitted.
  • Within 60 seconds, proceed as follows
  • Switch ignition OFF and remove key.
  • Insert new key and switch ignition ON.
  • Wait approximately 10 seconds.
  • Ensure acoustic signal is emitted and immobilizer warning lamp remains illuminated for 3 seconds indicating programming complete.

·         For each additional key repeat procedure starting from the beginning.

·         Replacement keys can also be programmed using diagnostic equipment.

NOTE: A maximum of 8 key can be programmed.